🔧 Bolec Large Charger Repair Service – Extend the Life of Your CP1224LH & CP1512LH Chargers

At Bolec Electronics, we understand the real-world demands placed on backup power systems. Our CP1224LH and CP1512LH battery chargers are trusted across commercial buildings, transport infrastructure, and critical service facilities—including major Melbourne train stations.

But even the toughest gear needs maintenance. That’s why we offer a comprehensive repair service for these chargers at an affordable flat rate of $580 AUD (excluding freight and GST).

If your charger has failed or is showing signs of reduced performance, we can restore it to full function—without the need for costly full replacement.

⚡ About the CP1224LH & CP1512LH

Our CPLH series battery chargers are known for:

• Constant potential, current-limited charging
• Short-circuit and reverse polarity protection
• Support for vented/sealed lead acid and NiCad batteries
• Alarm contacts for high/low battery voltage and charge fail
• Manual or automatic boost modes with onboard indicators

These chargers are ruggedly built for industrial use and feature repairable, modular construction—meaning serviceability is built into the design from day one.

🔄 Why Repair Instead of Replace?

For many facilities, replacing a failed charger can be:

• More expensive than repair
• Logistically complex due to installation and compliance
• Wasteful, especially when only one board or component fails

Instead, we offer a flat-rate repair service:

• $580 including labour and parts (minor component-level repairs)
• Fully bench-tested and cleaned
• Rapid turnaround (typically 5–7 business days from arrival)
• Australian-based service—no need to ship overseas
• 3-month workmanship warranty included

We’ll inspect the unit, replace any failed components, and run the charger through our full performance test procedure—including load simulation and relay triggering.

🏢 Who Uses Bolec Chargers?

Our CP series chargers are installed in:

• Emergency lighting and UPS backup systems
• Pump stations and water infrastructure
• Diesel generator enclosures
• Government rail systems and switching yards
• Commercial power management rooms

Clients choose Bolec for our dependability, local support, and designs that prioritize serviceability and longevity.

🧰 Common Faults We Repair

Here are just a few of the issues our repair team can address:

• Charger not switching to float or boost mode
• No DC output (blown fuse, transistor failure, regulator fault)
• Boost terminal stuck on or unresponsive
• Fan not operating or noisy
• Intermittent alarms or relay chatter
• Excessive heat due to failed cooling controls
• LED status lights not functioning properly

If you’re not sure what’s wrong, send it in—we’ll diagnose it and confirm it’s economically repairable before proceeding.

📦 How to Book a Repair

1. Email us at sales@bolec.com.au with your unit’s serial number, fault description, and contact info.
2. We’ll confirm service availability and provide an RMA reference.
3. Ship your charger to our Melbourne workshop, properly packed and labeled.
4. Once received, we’ll repair, test, and dispatch it back to you promptly.

💡 Note: In cases of severe damage or obsolescence, we’ll contact you before proceeding.

♻️ Built to Last – and to Be Repaired

Too many modern chargers are sealed, disposable, and impossible to service. At Bolec, we take a different approach: engineered durability with built-in repairability.

By choosing to repair your CP1224LH or CP1512LH, you’re not only saving money—you’re reducing landfill and supporting sustainable, Australian-made electronics.

✅ Summary

• Repair your CP1224LH or CP1512LH charger for $580
• Australian-based service, fast turnaround
• Tested and warranted for peace of mind
• Ideal for commercial, industrial, and transport infrastructure

Whether you’re running a backup system in a city office tower or maintaining essential power at a train station, Bolec chargers deliver—and now, we’ll help you get even more life from them.

📞 Get in touch: https://bolec.com.au
📧 Book your repair: sales@bolec.com.au