Australian Made Since 1978 Quality Reliability Local Support
Australian Made Since 1978
  • Home
  • /
  • Shop
  • /
  • BMT-55 30min Mechanical Timer – Irrigation Pump Override Timer

BMT-55 30min Mechanical Timer – Irrigation Pump Override Timer

$295.00

16 in stock (can be backordered)

30min mechanical timer for irrigation pump override

Reliable wind-up timer for manual run control, bore pump testing, water transfer systems, and control panels.

Features vertically mounted wiring terminals and DPDT switching.

Set up to 30min for automatic shut-off.
No external power supply or programming required.

BMT-55 30 Minute Mechanical Timer

30-minute mechanical countdown timer for manual operation and control of irrigation pumps, bore pumps, and control panels.

The BMT-55 30 Minute Mechanical Timer is a wind-up countdown timer designed for manual run control, pump testing, and other timed control applications in irrigation, pumping, agricultural, and industrial systems.

The timer allows a suitably wired control circuit to operate for a selected period of up to 30 minutes. When the timer returns to zero, its contacts return to their rest positions. Depending on how the control circuit is wired, this can be used to stop a pump or other connected equipment automatically.

The BMT-55 uses a fully mechanical timing mechanism, so no separate electrical power supply is required for timing. Simply turn the dial clockwise from zero to the required time and the timer will count down automatically.

The 30-minute model has four terminals and a DPST switch configuration, with one normally open contact and one normally closed contact. The contact configuration should be checked carefully when replacing an existing timer.

Typical irrigation use: Use the timer in a suitably designed pump control circuit to provide temporary manual operation for up to 30 minutes, such as during pump testing or maintenance.

Key Features

  • 0–30 minute mechanical countdown timer
  • No separate electrical supply required for timing operation
  • Simple wind-up dial operation
  • Dial marked in one-minute increments, with numbers every five minutes
  • Contacts return to their rest positions when the timer reaches zero
  • Four terminals with DPST switch configuration
  • One normally open contact: terminals 5 and 4
  • One normally closed contact: terminals 1 and 3
  • Suitable for appropriately designed irrigation, agricultural, and industrial control circuits
  • Timing tolerance of ±5%, as stated in the specification

Typical Applications

  • Irrigation pump manual run control
  • Bore pump testing and temporary operation
  • Pump control panel timing
  • Water transfer system control
  • Tank filling and water management systems
  • Maintenance runs for pumps and motors
  • Industrial equipment run control
  • Ventilation and machinery control circuits

Technical Specifications

FeatureSpecification
Timer typeMechanical wind-up countdown timer
Timing range0–30 minutes
Dial markingsOne-minute increments; numbered every five minutes
Switch configurationDPST: one normally open and one normally closed contact
Number of terminals4
Normally open contactTerminals 5 and 4
Normally closed contactTerminals 1 and 3
Contact rating250 VAC; 16 A resistive / 4 A inductive
Electrical life10,000 operations
Timing tolerance±5%, as stated in the 30-minute specification
Terminal type6.3 × 0.8 mm tab terminals
Maximum specified temperature125°C
Mechanism dimensionsApprox. 47 × 47 × 30 mm
Spindle length22.5 mm
External power supply for timingNot required

Contact Operation

Timer positionNormally open contact: 5–4Normally closed contact: 1–3
At zeroOpenClosed
During countdownClosedOpen
Returned to zeroOpenClosed

Installation: Electrical installation must be carried out by a licensed electrician. Isolate the electrical supply and verify the contact operation with a continuity tester before connecting the timer. Use a suitably rated contactor or relay where required.

Why Choose the BMT-55 30 Minute Mechanical Timer?

The BMT-55 30 Minute Mechanical Timer provides a simple way to add timed manual operation to a suitably designed control circuit. Its mechanical wind-up mechanism requires no batteries, programming, or separate electrical supply for timing.

The 30-minute timing range is useful for temporary pump operation, system testing, and maintenance. Its four-terminal arrangement provides one normally open and one normally closed contact for appropriately configured control applications.

Frequently Asked Questions

What is the BMT-55 30 Minute Mechanical Timer used for?

It can be used in suitably designed control circuits for irrigation pumps, bore pumps, water transfer systems, control panels, and other equipment requiring a timed run period of up to 30 minutes.

Does the timer require power?

No separate electrical supply is required for the mechanical timing mechanism. Connected equipment and its control circuit still require their normal operating power.

Can it automatically switch off a pump?

Yes. The normally open contact between terminals 5 and 4 opens when the timer returns to zero. When correctly integrated into a suitable control circuit, this can be used to stop a pump after the selected time has elapsed.

How many terminals does the 30-minute model have?

It has four terminals: terminals 5 and 4 form the normally open contact, while terminals 1 and 3 form the normally closed contact.

Can it replace an existing BMT-55 timer?

Other BMT-55 models may have different contact arrangements. A licensed electrician should check the terminal connections, switching requirements, and physical fit before replacing an existing timer.

Can it be used for pump testing?

Yes. When installed in a suitable control circuit, it can provide a timed period of temporary pump operation for testing and maintenance.

Can it directly control a pump motor?

The timer contacts are rated at 250 VAC, 16 A resistive or 4 A inductive. A suitably rated contactor or motor starter may be required for the pump load. A licensed electrician should check the motor and control circuit requirements.

Bolec Electronics


Founded in 1978, Bolec Electronics has developed a portfolio of over 80 products and a reputation that survive and thrive in some of Australia's harshest environments. Bolec Electronics is the OE supplier to some of the world's largest truck and engine manufactures.

Premium quality

Easy to install

lightweight

Designed and made in Australia

>