Pack of 10: BOLEC WL601 Radiator Level Alarm (12/24V)
Protect your engine before it overheats
The BOLEC WL601 warns you before your engine runs dry.
It instantly detects low coolant level and triggers an alarm so you can take action before overheating or engine damage occurs.
Ideal for 4WDs, trucks, buses, and industrial engines.
Why You Need It
- Prevents costly engine damage from coolant loss.
- Temperature gauges react too late—this alarms early.
- Simple, reliable system used by OEMs and fleet operators.
How It Works
The probe sits in the radiator water. As long as the coolant touches the probe, resistance stays low.
When the level drops below the probe, resistance rises—after about 7 seconds, the relay switches and triggers your alarm light or buzzer.
- Alarm output: relay to ground (1.5 A resistive at 12/24 V DC).
- Built-in 7 s delay prevents false alarms on bumps or corners.
- Epoxy-potted design for vibration and moisture resistance.
Applications
- Cars, 4WDs, trucks, buses, agricultural and marine engines.
- Dewatering pumps and industrial tanks (use two units for level control).
- Off-grid setups and caravans for water tank monitoring.
Built Tough for Aussie Conditions
- Epoxy sealed electronics — waterproof and vibration-proof.
- Works with 12 V or 24 V negative-ground systems.
- Compact, rugged module: 58 × 42 × 29 mm.
- Quick-connect terminal block, easy to wire.
What’s Included
- WL601 module
- WL601P radiator probe (push-in type, 9.5 × 16 mm rubber seal)
- 4 way terminal block
- 4 x brass terminals
- Basic wiring diagram
Installation Overview
Mount near your fuse panel, drill a 9.5 mm hole about 13 mm above the radiator core,
insert the probe, and wire IGN+, ground, probe, and alarm output.
Add a fuse for protection. Most installs take under an hour.
If unsure, ask a mechanic or auto electrician—especially for plastic radiator tanks.
Technical Data
- Operating voltage: 12/24 V DC (negative ground)
- Alarm delay: ~7 s after coolant loss
- Output: relay to ground (N/O), 1.5 A resistive max
- Sensing: AC through coolant (no electrode plating)
- Epoxy-filled ABS housing










